|
| |
| Non Contact Level Meters |
Radar (FMCW) Level Transmitter for bypass chamber and magnetic level indicator
- Device welded to a bypass chamber with an optional IP68 level indicator (BM 26 Advanced) – for the continuous measurement of clean liquids
- Device is configured and ready to use before it leaves the factory
- Measuring distance up to 8 m / 26.2 ft
The OPTIWAVE 1010 is a non-contact FMCW radar welded to a bypass chamber with an optional IP68 level indicator (BM 26 Advanced). It continuously measures the distance and level of clean liquids.
- 2-wire, loop-powered, HART®, 6 GHz Radar (FMCW) Level Transmitter for clean liquids
- Welded to a bypass chamber or BM 26 Advanced MLI
- Device is configured and ready to use before it leaves the factory
- Adjustments possible using HART® communication / DTM / DDs
- ±5 mm / 0.2¨ accuracy
- Measuring distance up to 8 m / 26.2 ft
- Metaglas® or Metapeek seal (dual process seal system)
- Max. process conditions +150°C / +302°F and 40 barg / 580 psig
- No minimum dielectric constant when using a float
- Chemical industry
- Power
- Water & Wastewater
- Automotive
- Raw material storage
- Water hammer arresters
- Liquefied gas
- Hydraulic oil
|
|
|
|
|
| Contact Level Meters |
Guided Radar (TDR) Level Meter
- Continuous level measurement of liquids and solids
- Cost-effective 2-wire loop-powered TDR level meter
- Intuitive 5-step quick setup procedure
This device is a 2-wire TDR level meter for measuring distance, level, volume and mass of liquids and solids. Its simple, compact design allows service technicians to quickly assemble the probe and attach it to a threaded connection. It is an affordable solution for applications that do not require a high level of accuracy and is also an excellent alternative to traditional level controls such as RF Capacitance, conductive and DP transmitters.
The display can be ordered with the device or as an accessory. It shows measurement data on a 128 × 64 pixel screen. The configuration menu permits the device to be set up in a small number of intuitive steps.
- 2-wire loop-powered level meter for liquids and solids
- For general-purpose use (non-hazardous areas)
- Measuring range up to 20 m / 65.6 ft (liquids) and 10 m / 32.8 ft (solids)
- Easy menu navigation without opening the housing
- Probes and process connections are made of stainless steel
- For process temperatures up to 100°C / 212°F and pressures up to 16 barg / 232 psig
- Display in 9 languages: including Chinese, Japanese and Russian
- O.E.M. equipment
e.g. as part of an automatic oil lubrication feed system
- Machine & skid assembly
The control of water and cleaning agents in industrial washing machines, filling machines for ink and beverages
- Tank & silo building
Tanks for water, oil, underground tanks, rental tanks for glycol etc.
- Water & wastewater
Level control in water basins, ports, locks
- Pulp & paper
All kinds of storage tanks and recyclying tanks
- Agriculture
Water control for greenhouses, livestock feed management, blood recovery in abbatoirs
- Chemical
Storage of plastic pellets
- Automotive
Paint booths, lubricant oils
- Food & beverage
Various storage and recycling tanks for wine, beer, fruit juice, ...
- Level measurement in buffer tanks, collectors and simple process applications
- Silo level monitoring in quarrying and agriculture
- Volume measurement for storage tanks (with a 30-point strapping table)
|
|
|
|
|
| Level Switches |
Vibration Level Switches for solids
- Highly robust tuning fork
- Insensitive to build-up
- Set-up without filling
- Detection of solids in water
- Maintenance-free
Cement or aggregates are placed in interim storage in multiple chamber silos. When the chambers are filled, large quantities of dust are generated. Depending on the consistency of the aggregate, different material cones are formed and the product properties can change from filling to filling.
OPTISWITCH offers additional protection against overfilling the aggregate silo. The flexible suspension cable avoids mechanical strain caused by movements of the bulk solid. A filling is not necessary for setup. Because OPTISWITCH has practically no moving parts, it is not subject to wear.
- OPTISWITCH 3100 C - Compact version
- OPTISWITCH 3200 C - Version with suspension cable
- OPTISWITCH 3300 C - Version with tube extension
Bulk solids
- High ruggedness of the tuning fork
- High abrasion resistance
- Insensitive to build-up
- Set-up without filling
Plastics processing
- Tuning fork suitable up to density < 20 g/l (z.B. Aerosile)
- Product independent switch point
- Set-up without filling
Hydroelectric power station sedimentation tank
- Detection of solids in water
- Set-up without filling
- Maintenance-free
|
|
|
|
|
| Bypass Level Indicator |
The proven mechanical-based solution for level indication
- Most compact bypass level indicator on the market
- Robust, stainless steel design
- Permanent, IP68 local indication without power supply
The BM 26 is a simple, rugged instrument designed to indicate level or interface. It indicates level using a float magnetically coupled to an index or a column of rotating flaps. It is ideal for aggressive media stored in tanks when the PTFE lining option is used.
For liquids with densities less than 0.5 kg/l / 31 lb/ft³, pressures more than 120 bar / 1740 psig and temperatures higher than 300°C / 570 °F, we recommend our BW 25 displacer-type level indicator.
- Stainless steel design (optional NACE conformity)
- Proven technology
- Temperature range: -200…+300°C / -325…+570°F
- Pressure range: -1…120 bar / -14.5…1740 psig
- Density: 0.5…3 kg/l / 31…187 lb/ft³
- Float material options: 316L, 316 Ti and Titanium
- Stainless steel scale with wide choice of markings: m/cm, ft/in, %, volume etc.
- Less risk of leakage than a sight glass - little or no maintenance needed
- Easy to install
- Ideal for tanks with obstructed environments
- Optional indication of interface
- Optional approvals for EEx i or EEx d applications
- Chemical and Petrochemical
- Oil and Gas
- Power
- Boilers
- Condensators
- Hydrocarbons and Separators
- Liquid gas
- Process and storage tanks
- Steam cracking
|
|
|
|
|
| Potentiometric Liquid Level Measuring Device |
- Hygienic installation
- Completely made of stainless steel
- Maintenance / seal-free installation
The BM 500 level gauge operates on the potentiometric measuring principle and is designed for use in all electrically conductive products with a minimum conductivity of 1 µS/cm (e.g. distilled water).
This method is particularly suitable for measuring levels in small vessels containing viscous, pasty or heavily caking products. The electronic evaluation unit is integrated in the connecting head and supplies a level-proportional output signal of 4 … 20 mA.
The HWM 500 hygienic process welding sleeve ensures installation in conformity with standards of hygiene. Due to its high temperature resistance (140°C / 285°F), the BM 500 is eminently suitable for CIP cleaning and sterilizing processes.
- Fruit juice
- Ketchup
- Beer
- Toothpaste
- Dairy products
The measuring principle is comparable to that of a slider potentiometer, with in this case the liquid representing the slider pick-off.
An alternating current is applied to a stainless steel tube to cause a drop in voltage via the electrical resistance of the tube (cf. slider path). The conductive wall of the vessel forwards the tapped voltage conducted through the liquid to a high-resistance amplifier. Based on the supply voltage, this yields the ratio between the depth of immersion and the total length of the tube.
Together with the high-resistance pick-off, this ratio explains why the measuring system is independent of the conductivity of the product. Sticky deposits merely form a parallel connection with the anyway very low-resistance tube. What is measured, therefore, is only the actual product between tube and vessel wall.
|
|
|
|
|
| Liquid Level Indicator |
Description / Specification of Liquid Level Indicator
We are involved in offering a wide range of Liquid Level Indicator to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Liquid Level Indicator. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
|
|
|
|
|
|
|
|
|
